Picture frame with magnetic catch
Homemade magnetic picture frames
Online since: 18/04/2011,
Number of visits: 136262
0
Addition from customer M.G.
(Switzerland):
The other day, I completed a presentable picture frame project with your super magnets.
For two picture frames with magnetic catch, I had a total of four acrylic glass panes cut to a size of 460 x 337 x 5 mm.
The two panes for the front are made of clear acrylic glass; the two panes for the back are white acrylic glass.
8 holes with a diameter of 5 mm were drilled into each pane, maintaining a distance of 10 mm from the centre of each hole to the edge.
The holes were drilled precisely so I could simply push the 5 x 5 mm disc magnets
into them – without having to use glue.
One hole remains without magnets so the picture frame with magnetic catch can be discreetly hung on the wall.
Project from Dario Ernst (Germany):
My newest application is a picture frame with a pane of glass held in place by magnets.
This allows for a quick and easy change of the contents.
Good quality picture frames that can hold several small pictures are hard to find – and most of them usually fall apart after about the fifth attempt of switching the contents.
By using magnets, I have found a (both visually as well as technically) beautiful solution to the problem.
I have documented the project in detail in my blog
(in English).
Below is a highly shortened version.
Required materials:
Assembly:
Quickly put together a wooden frame in your hobby room at home: Cut HDF panels to size, glue them together and treat with wax or oil afterwards.
Next, drill 8 holes of approx.
10 mm in the back of the frame.
Then use a conical drill bit to enlarge the holes until the magnets (discs type S-12-04-N) can be squeezed in there from the front.
Lay the pane of glass on top of the wooden frame.
Take 8 disc magnets type S-10-03-N,
apply epoxy glue to one side of each magnet, then let them snap onto the glass over the magnets in the frame.
Please note: Check the polarity of the magnets before glueing! Let the glue dry at least overnight.
And the glass also stays in place nicely.
Even if the frame is lifted from the back or shaken forcefully, the glass doesn’t fall or slide off!
Now you only need to glue a metal hanger to the back of the frame, and it can go up on the wall!
For my frame, I added cardboard frames to several small pictures and placed them into the frame by using spacers (also made of cardboard).
These pictures can now be changed as often as desired!
Note from the supermagnete team:
We carry ready-made photo frames with magnetic catch
in a variety of sizes:
In addition, you can find a few similar projects on our website:
Articles used
Load...
Disc magnet Ø 12 mm, height 4 mm, holds approx. 3,1 kg, neodymium, N45, nickel-plated
| 5 pcs. | 0,78 EUR ea.* | |
| from | 15 pcs. | 0,68 EUR ea.* |
| from | 40 pcs. | 0,60 EUR ea.* |
| from | 80 pcs. | 0,55 EUR ea.* |
| Ask for a rebate from 700 pcs. | ||
Available: 41 800 pcs.
Disc magnet Ø 10 mm, height 3 mm, holds approx. 1,8 kg, neodymium, N42, nickel-plated
| 10 pcs. | 0,57 EUR ea.* | |
| from | 40 pcs. | 0,48 EUR ea.* |
| from | 80 pcs. | 0,44 EUR ea.* |
| from | 160 pcs. | 0,40 EUR ea.* |
| Ask for a rebate from 850 pcs. | ||
Available: 342 390 pcs.
Disc magnet Ø 5 mm, height 5 mm, holds approx. 940 g, neodymium, N45, nickel-plated
| 20 pcs. | 0,33 EUR ea.* | |
| from | 60 pcs. | 0,28 EUR ea.* |
| from | 140 pcs. | 0,24 EUR ea.* |
| from | 360 pcs. | 0,21 EUR ea.* |
| Ask for a rebate from 1 200 pcs. | ||
Available: 1 763 620 pcs.
0 people like this customer project
-Projects are bookmarked in your customer account
The entire content of this site is protected by copyright.
Copying the content or using it elsewhere is not permitted without explicit approval.
Copying the content or using it elsewhere is not permitted without explicit approval.